​Amercian Geoservices LLC does not provide any construction services, we provide only engineering consulting on Geopolymer injection projects. following information is obtained from URETEK websites and from available literatures. URETEK Deep injection is an internationally patented process, which utilizes the expansion properties of a mix of unique geopolymer resins with specialized techniques to increase the bearing capacity of inadequate foundation soils deep under buildings and other structures. The composite materials quickly cure to a strong, stable and enduring matrix that is environmentally neutral.
​

​Process:
The soil conditions are surveyed to determine how deep into the soil we need to inject the geopolymer and what kind of obstacles can be found in the soil to understand the soil binding requirements. Geopolymer is then injected to a desired depth directly below the foundations binding the underlying soil and, where appropriate, is used to raise the foundations to the desired height.
 
Factory and warehouse buildings, floors and driveways may all develop problems due to loss of ground support. Most subsidence problems can be fixed quickly and economically by expanding structural resin injection with minimal interruption to your work. The process, often referred to as slab lifting, or concrete floor lifting, is fast and clean: no excavation, no water, no cement dust, no mess: unlike concrete underpinning. You don’t have to wait days for new cement to dry and to cure. Your forklifts, pallet jacks, and trucks can operate over the area just 30 minutes after we finish the slab injection. Moving and sunken slabs can usually be re-supported, re-levelled, and saved, unless too badly cracked. In a complex situation our experienced technical people can advise you about what can be saved and what should be replaced.
Structural expanding resin can re-level sunken slabs and re-support moving slabs in driveways, parking areas, garages, hardstand areas, and loading docks quickly, accurately and economically. With underpinning by resin injection, it generally takes only a few hours to level driveways, loading docks, hardstand areas and parking areas. Even the heaviest vehicles – forklifts, trucks and airliners – can run smoothly just 30 minutes after foam underpinning is completed. There is minimal interruption to traffic flow.